Solids by Volume:
Weight Per Gallon:
Recommended Dry Film:
Recommended Dry Time:
Excellence In Coloring Your World
Following are the technical specifications for our Wall and Roof blends of Advantage25.
High Build Elastomeric Insulating Coating, which provides excellent flexibility, durability, weather resistance and insulating properties to exterior surfaces.
Walls made of masonry, wood, asphalt, urethane foam and galvanized metal.
White and pastels
100% Elastomeric acrylic
170 sq. ft/gal @ 20 dry mils
Touch - 4 hours, Recoat - 24 hours, Full Cure - 7 days
DO NOT THIN
Mildew Resistance - excellent
Wind Driven Rain (ASTM-D6904-3) - passes
Water Vapor Permeance (ASTM-D1653) - 19 perms
Elongation (ASTM-D2370) - 250%
Tensile Strength (ASTM-D2370) - 200 psi
Low Temperature Flexibility (ASTM-D522, Method B@10°F) - passes
Apply at temperatures between 50°F and 100°F. DO NOT REDUCE.
BRUSH SMALL AREAS ONLY, use nylon/polyester brush.
ROLLER SMALL AREAS ONLY, use aggregate coatings roller.
SPRAY: Graco RTX 1500, Titan Super Tex 6, 30-35 psi air to pump, 3/4" hose, 3/16" or 1/4" tip.
Apply 2 coats @ 6-7 wet mils per coat, back roll to avoid air entrapment, overnight dry between coats
Substrate must be clean, dry, and free from contamination. Rusty metal areas must be wire brushed and primed.
Avoid ponding water conditions.
Keep From Freezing
Material Safety Data Sheets:
Resistance to Dirt Incrustation:
Percentage Stretching at 32°C:
Resistance to Maximum Tension:
Adherence to: Galvanized Steel,
Aluminum, Fibrous Cement,
Concrete, Asphalt, Wood:
Fungicide/Algicide 28 days:
Resistance to Impact:
Resistance to Rain and Strong Winds:
Wet Application MILS Per Coat:
Dry Film Product MILS Per Coat:
Fire Test ASTM-E 108-90:
Solids By Volume:
72 Perms with thickness of 65 microns
160 lbs/sq. inch
No humidity penetration after 24 hours
17-20 MILS Each Coat
10-14 MILS Each Coat
Up to 3db/second in sheets of up to 0.27
Percentage solids 57.8%
70-100 sq. ft./gal. @ 10-12 mil thickness